Cepstral is a TTS (Text to Speech) engine, Cepstral provides realistic synthetic voices in the following languages : US English, UK English, Italian, German, Canadian French & Americas Spanish
For further information about Cepstral, please visit their website: https://www.cepstral.com/
Do *not* load mod_cepstral and mod_flite at the same time! (Symbol collision)
Install & Configure in Linux
As of 2016.05.17 Cepstral version 6 is reported to work with FreeSWITCH. Previously, the suggested version to use was 4.x since there were known issues with 5.1 (which is closed source).
These instructions were developed under the old versions and possibly require updating for use with modern versions of Cepstral. Please help us keep this page current if you know of changes by commenting below or editing this page (ask for edit permission if needed).
- Buy or download a free trial voice from Cepstral. Each voice comes with the library, so the SDK is not needed.
- cd /opt
- For x64 do
- wget http://www.cepstral.com/downloads/installers/linux64/Cepstral_Allison-8kHz_x86-64-linux_6.0.1.tar.gz
- For i386 etc. do
- wget http://www.cepstral.com/downloads/installers/linux32/Cepstral_Allison-8kHz_i386-linux_6.0.1.tar.gz
- tar xvfz Cepstral_Allison-8kHz_x86-64-linux_6.0.1.tar.gz
- cd Cepstral_Allison-8kHz_x86-64-linux_6.0.1
- tar xvzf Cepstral_Allison-8kHz_i386-linux_6.0.1.tar.gz
- cd Cepstral_Allison-8kHz_i386-linux_6.0.1
- Follow prompts (recommended add: export SWIFT_HOME=/opt/swift to your FS user profile)
- Add /opt/swift/lib (if you chose the default install) to end of file /etc/ld.so.conf
- run ldconfig
- Define SWIFT_HOME to point to install root (e.g. export SWIFT_HOME=/opt/swift)
- Edit modules.conf and uncomment the line: asr_tts/mod_cepstral
- Build FreeSWITCH
- Enable mod_cepstral in the modules.conf.xml file by uncommenting <load module="mod_cepstral"/>
You can also use a Cepstral voice with a language other than English without editing any files. <lang> is the voices language, i.e. de or fr. Just add two links in $SWIFT_HOME/lib:
- libceplang_en.so -> libceplang_<lang>.so.4.2
- libceplex_en.so -> libceplex_<lang>.so.4.2
If you don't use the default install dir (/opt/swift) you will need to modify `src/mod/asr_tts/mod_cepstral/Makefile`
You must define an environment variable SWIFT_HOME in the shell where you run fs, otherwise you won't hear any audio.
Usage from Dialplan
You should now be able to use something similar to the following in your dialplan
Usage from script
Using a 16khz voice and 0.03 for RTP Packet Size (Sipura Setting), it will sound horrible. Workaround: modify RTP Packet Size to 0.02 in Sipura config, under Advanced/SIP section.
If audio gets cut off at the beginning, try using: <break time='1s' /> tags as a workaround.
Single quotes ( ' ) get stripped out from strings run through FreeSWITCH code to chop strings of the form a|b|c into bits. Use double quotes ( " ) instead. If, for example, you want to pass something like this to Cepstral:
If you find that the volume of your TTS is much higher (or lower) than that of the sound files, try decreasing the volume using the 'volume' tag with Cepstral's SSML. For example, this will lower the TTS volume significantly:
The '15' in the above example means 15% of default volume.
For other SSML tricks check out the examples on Cepstral's support site.
In order to compile mod_cepstral.c under Visual Studio C++ you must ensure the Cepstral SDK is installed on your build machine. The SDK is not free. You can, however, obtain an evaluation copy Contact Cepstral Support with subject line "Cepstral Windows SDK".
Once the SDK is installed you'll need to make sure mod_cepstral is selected to be compiled (not on by default). Right click the FreeSWITCH solution from the Solution Explorer in VS and select Configuration Manager. Scroll down until you see mod_cepstral and select the Bulid flag.
In addition you need to verify the following properties for mod_cepstral.c (right click mod_cepstral from the Solution Explorer on the left hand side and select "properties").
- Additional Include Directories (from C/C++, General): This path should be set to "C:\Program Files\Cepstral\sdk\include"
- Additional Library Directories (from Linker, General): This path should include "C:\Program Files\Cepstral\sdk\lib\windows" and "C:\Program Files\Cepstral\sdk\lib\winnt". Between Cepstral 4.2 and 5.0 these paths changed.
Finally, you'll need to make sure the the Cepstral bin path is part of the Windows PATH environment variable as the Cepstral DLLs are installed in this directory (C:\Program Files\Cepstral\bin ). Without this path mod_cepstral.DLL will not initialize during Freeswitch startup.
Cepstral 5.1 under Ubuntu
Here is how it worked under Ubuntu 8.04: First, disable mod_flite as they are incompatible.
Then set environment var export SWIFT_HOME=/opt/swift
Check if /opt/swift /lib/libswift.so.5 link exists. If not provide a symbolic link from the actual libswift.so library.
Create a file /etc/ld.so.conf.d/swift.conf with the following content:
This worked with actual sources Rev. 10438 (End of Nov 2008). Previous sources had a bug in the APR lib.
When selecting a different voice in session.speak it defaults to original voice.
Please make sure you use the correct name in your session.speak. In the /opt/swift/voices/ you will be able to see the names you should use. (e.g. Allison-8kHz, Callie-8kHz, David-8kHz, Diane-8kHz, Marta-8kHz, Miguel-8kHz, William-8kHz)
Common error is to just type session.speak("cepstral","Allison") when it should be session.speak("cepstral","Allison-8kHz")
How do I install a license purchased from cepstral?
Run the following command "swift --reg-voice" and answer the questions
Your Name, Company (if applicable), Voice (e.g. Miguel-8kHz), License
Can I use a 16khz "desktop voice"?
Q: Can I use a 16khz "desktop voice" or do I have to use an 8kz telephone voice?
A: You can use a 16kz voice and FreeSWITCH™ will re-sample automatically to 8khz as needed. Bear in mind this will add to your cpu overhead, so an 8khz voice is better from a performance perspective.
libswift.so.4: cannot open shared object file: No such file or directory
Try manually adding the /opt/swift/lib directory to /etc/ld.so.conf or /etc/ld.so.conf.d/ and run ldconfig.